电气设计英语翻译

电子工程师;简单说就是弱点。包括所有的电子产品。（交换机，通讯管理机）电气工程师：简单说是低压高压。包括所有的电器产品。（断路器、接触器等。）

电气工程师和电子工程师英文分别为Electrical Engineers； Electronics Engineers。

1、electrical 形容词， 有关电的；电气科学的。电气（electrical，electrical power and equipment）是电能的生产、传输、分配、使用和电工装备制造等学科或工程领域的统称。

例如：

电气工程 electrical engineering；

.shipments of electrical equipment

电气设备的运输

2、 electronics 名词，电子学；电子工业。电子学主要研究电子的特性和行为，以及电子器件的物理学科。如：

electronics industry 电子工业；电子业

consumer electronics 消费性电子产品；家用电子产品

power electronics 电力电子学；动力电子设备

electronics factory 电子厂，电子工厂；无线电元件厂

扩展资料：

电气科学和电子学含义不同，英文表达也有所不同，用electrical 形容词指电气科学的，

用electronics 名词，表示电子学；电子工业。

1、What can you find in an electrical shop?

你能在一家电器商店里找到什么？

2、His labor efficiency was very high. So he was one of the elite in the electronics field.

他的工作效率很高，所以他是电子学领域的一名出类拨萃的人物。

电气工程师 ----electric(al) engineer电子工程师英文------ electronics engineer

花点钱找个翻译公司吧。百度上很难找到有专业背景的，翻译的东西没法用，都是让歪果仁翻白眼儿的译文。

为您解答如下：天津某化纤毛纺厂供电系统设计 摘 要 本设计旨在通过对天津某化纤毛纺厂供配电系统的设计使设计者了解掌握工业企业供电系统的设计过程及其基本技能，在设计过程中不但加深了对供配电这门技术的理解，还培养了对理论知识灵活应用能力。设计过程包括：负荷计算、方案论证、短路计算、设备选择、无功补偿及变配电所的设计等。此污水处理厂为二级负荷，有两路电源进线，厂区内共设两个降压变电所（35KV/10KV）.（10KV/0.4KV）。因供电电源要求功率因数大于0.9，因此通过在低压侧加电容进行补偿使之达到要求。通过负荷计算和对各短路点的电流计算选择设备，使之满足要求。在设计过程中充分考虑了供电系统的可靠性与安全性，并力求使之经济合理。关键词：变电所；变压器；负荷计算；短路计算；照度计算；功率补偿苏州某研发中心大楼电气设计摘 要 本设计为苏州某研发中心大楼的电气设计。电气设计遵循《民用建筑电气设计规范》（JGJ16-2008），并符合国家现行的其他规范和标准。根据建筑的规模大小和功能需求，查询规范知，该建筑属于高层民用建筑，建筑类别为一类建筑，耐火等级为一级，防雷等级为二级，一般照明采用三级负荷供电，消防用电和重要负荷采用一级负荷供电,低压配电系统的接线方式采用TN-C-S。防雷系统设计采用避雷网。该建筑电气设计包括两部分：强电系统设计和弱电系统设计。其中强电部分包括低压配电设计、照明系统设计、防雷与接地系统设计；弱电部分包括消防系统设计、有线电视系统设计、电话系统设计、网络系统设计、安防系统设计。设计中要根据建筑的规模、使用要求及设计原则，计算得出相应的技术指标，并进行导线及设备的选型，使之满足经济合理性及节能要求，保证供电的可靠性。关键词：低压配电；照明；消防；防雷与接地Tianjin a certain chemical fiber woolen mill power supply system design Pick to This design aims to through the design of a certain chemical fiber woolen mill power supply system in tianjin to designers to grasp the design process of industrial enterprise power supply system and its basic skills, in the design process not only deepened the understanding of power supply this technology, and train the ability of the flexible application of theoretical knowledge. The design process include: load calculation, short circuit calculation, equipment selection, project demonstration, reactive power compensation and distribution design, etc. The sewage treatment plant as the secondary load, there are two way power supply into line, the factory have two step-down substation (35 KV / 10 KV). (10 KV / 0.4 KV). Because of the power supply for power factor more than 0.9, so through in low voltage side capacitance compensation to meet the requirements. Through load calculation and selection for the current calculation of short-circuit point equipment, to meet the requirements. In the design process fully consider the security and reliability of power supply system, and strive to make economic sense. Key words: substation; Transformer; Load calculation; Short circuit calculation. Intensity of illumination computation; Power compensation A research and development center building electrical design in suzhou Pick to This design for a research and development center building electrical design in suzhou. Electrical design follow the civil construction electrical design specification (JGJ16-2008), and other specifications and conform to the current national standards. According to the scale of construction and the function demand, query, the building belongs to the high-rise civil buildings, category for a class of buildings, fire resistance rating for level 1, level of lightning protection for the secondary, general lighting use level 3 load power supply, fire power and important load using level load power supply, the connection mode of low-voltage distribution system adopts TN - C - S. With lightning protection network in lightning protection system design. The building electrical design includes two parts: the high voltage system design and the weak current system design. High-voltage electrical parts including low-voltage distribution design, lighting system design, lightning protection and grounding system design; Elv part includes the fire protection system design, cable television system design, telephone system, network system design, security system design. Design according to the size of the building, use requirement and design principles, calculation of the technical indicators, and wire and equipment type selection, make it meet the requirements of economic rationality and energy conservation, to ensure the reliability of power supply. Key words: low-voltage distribution; Lighting; The fire; Lightning protection and grounding . -----------------------------------如有疑问欢迎追问！满意请点击右上方【选为满意回答】按钮

Abstract: The electrical design of residential housing design are an important part of him for the beautiful residential architecture, residential architecture implementation of the use of functions to protect the lives and property of residents, lower housing costs, have a certain impact. In this paper, a preliminary study of residential interior design and residential electric Electric hygiene. Key words: residential electrical design safety and reliability of power supply system

电气工程师英文：Electrical engineer

电子工程师英文：Electronics engineer

1、电气工程师 Electrical engineer 例句

We need an electrical engineer for this job.

翻译：这份工作我们需要找一位电气工程师。

2、电子工程师 Electronics engineer例句

My son, an electronics engineer, produced from his pack a handheld Global Positioning System receiver.

我的儿子是位电子工程师，他却马上从包里拿出一个全球定位系统接收器。

扩展资料

电气工程师和电子工程师的区别

1、强电和弱电之分：

电气工程师大部分进行的是强电相关配件的开发，而电子工程师则是进行弱电相关开发研究，它们两个的区别，就像是发电厂和电子厂的区别，一个负责高低压开关，家用电器等的开发；另一个负责电子设备硬件软件的开发，也就是与弱电相关。

2、设备运行维护之分：

电气设计师主要对自动化设备进行设计维护，包括PLC编程、变频器、伺服控制器，接触器，时间继电器等。

而电子工程师，一般分为硬件工程师和软件工程师。硬件工程师主要负责电路分析、设计维护，并以电脑软件为工具进行PCB设计，待工厂PCB制作完毕并且焊接好电子元件之后进行测试、调试。软件工程师主要负责单片机、DSP、ARM、FPGA等程序的编写及调试，保证它们正常运行。

参考资料来源：百度百科—电子工程师

参考资料来源：百度百科—电气工程师