自整定英文

PID=port ID，在STP（生成树协议）中，若在端口收到的BPDU中BID和path cost相同时，则比较PID来选择阻塞端口。数字电视复用系统名词 PID(Packet Identifier) 在数字电视复用系统中它的作用好比一份文件的文件名，我们可以称它为“标志码传输包” 。

工程控制和数学物理方面 PID（比例积分微分）英文全称为Proportion Integration Differentiation，它是一个数学物理术语。PID由8位端口优先级加端口号组成，端口号占低位，默认端口号优先级128。

扩展资料

PID是各进程的代号，每个进程有唯一的PID编号。它是进程运行时系统分配的，并不代表专门的进程。在运行时PID是不会改变标识符的，但是进程终止后PID标识符就会被系统回收，就可能会被继续分配给新运行的程序。

只要运行一程序，系统会自动分配一个标识。

是暂时唯一：进程中止后，这个号码就会被回收，并可能被分配给另一个新进程。

只要没有成功运行其他程序，这个PID会继续分配给当前要运行的程序。

参考资料：百度百科——PID

Research of fuzzy self-adapt adjust PID control

Process to select target temperature actual temperature out of wind temperature heating rate drying time already with time fan frequency row cold valve technology number row cold interval time row cold open time return open time manual target temperature manual drying time manual fan frequency automatic alignment fan switch row cold spot moving PLC state fan open process setting parameter Settings forced set PID parameter PID auto-tuning operation steps: 1. Click the manual button, manual automatic indicator shows that manual and flicker. 2. Click the fan open, fan indicating flicker. 3. Click the PID auto-tuning button and wait for a few minutes, see PID auto-tuning successful hint window can be according to the determined to return.

Before using this equipment, please read and understand all the instructions for use, and keep it for future reference. If you still have some unsolved problems and questions after reading this statement, please contact us. Attention to important security issues: l Equipment must be used under the stated power supply voltage range (AC220V ± 10%), or else it will affect the normal work of equipment, may damage it. Equipment should be effectively grounded, to ensure people’s safety. This equipment is not an explosion-proof oven, so putting flammable and explosive goods into boxes is prohibited, in order to avoid explosion occurred. Equipment should avoid using in hot and humid environment; otherwise it will affect the normal use of it. After use the equipment, be sure to cut off the power. When it comes out equipment failure, you should ask professionals for maintenance or contact our company to solve the problem promptly.Important: In order to ensure that the equipment can meet the technical indicators, we recommend that you should place equipment in the room with constant temperature or the test room with air-condition. Sketch of the equipment No. Description: 1, thermometer jack (thermometer user-owned) 2, Shelf 3, door agraffe 4, temperature sensor 5, Alarm 6, power switch 7, temperature controller 8, heating power option 9, time switch 10, time controllerFirst, use Be used for sweat stains-resistant color fastness, color water-resistant, capacity of seawater impregnating -resistant test for all kinds of textiles, and be used with YG631 sweat stains-resistant color fastness instrument.Second, technical indicators: Applicable standards: GB/T3922, 5713,5714; ISO 105-E01, E02, E03, etc. Temperature regulation: ~ 99.9 ℃ at room temperature Temperature control accuracy: ± 1 ℃ Test method: A, 37 ± 2 ℃; B, 70 ± 2 ℃ (applicable to non-arbitration trial) Test of time: 0 ~ 99 m99s, 0 ~ 99h99m second gear Workroom Size: 330 × 330 × 260mm Supply voltage: AC220V ± 10% Power: 400 W Dimensions: 480 × 430 × 630mm (L × W × H) Third, the use of operation Equipment should be placed on a solid work platform. Connected to the power , open the power switch. Equipment must be effectively grounded, to ensure people’s safety.Choice of heating power, carrying out tests at 37 ℃, please [heating power] switch placed in the "low" position, otherwise it will cause uneven of the temperature. 70 ℃ conducting tests, in order to quickly heat up, first place the [heating power] selection switch at "high" position, pending the temperature rose to 70 ℃, then [heating power] selection switch at "low" position, To avoid temperature overshoot, ensure the inside temperature uniformity.l Test Temperature settings: According to [temperature controller] Manual to set SV parameters and PID parameters. Set temperature (SV parameters), click SET button, the row showed that SV, the lower single character flashes, at this time [temperature controller] enter to the setting state, through the shift key (), impairment key (▼), increment button (▲) long on impairment key (▼), or value-added button (▲) can change or continuous change the value, after the set, click the SET button again, then enter into working state.PID parameters of temperature controller and self-tuning feature as advanced function, has been set at the factory, and please do not arbitrarily amend them. It needs certain period of time to meet complete temperature balances inside of the box. Set the time of test, through pressing the code switch "+" and "-" on the [time controller] panel, and you can set the time of test arbitrary. Method A: In 37 ℃ ± 2 ℃ the temperature for 4 h; method B: in 70 ℃ ± 2 ℃ the temperature for 1 h (apply to the arbitration test). Attention to the state of switch in the middle of time (set the time as "hours" to be "h", "minutes" to be "m". After the inside temperature reaches balance, put the two prepared acid and alkali instruments with combination sample into the oven, [time switch] placed "on" position, the [time controller] start time, when the test time reaches settings, alarm sent alarm by sound and light to show that the test time is over. Place the [time switch] at "off" position, the [time controller] stop timing, the alarm stopped give a sound and light alarm. Open oven door removed sample, then a trial is over. After the test, please be sure to cut off the power!

屏幕管理单元小康 下跌一站式 打印速度 防洪速度 周期时间 屏幕测量 使屏幕测量 真正的基准距离 设置的名义基准的距离 设置基准tollerance + / - 三 烘箱温度 温度控制范围 经济温度 经济的延迟时间 温度的PID （是不是那个单词的缩写或者专业单词的简写） 控制参数PID 热PID参数 频道 参数 增益 速度 int.time （应该是缩写） der.time （这个应该也是缩写） 加速度 减速 过滤器的时间 int.limit （这个也是缩写吧） out.limit （这个也是缩写吧） 检查错误 max.error （这个也是缩写吧） 青砥微调 参考温度 开始调整 关于微调 全部保存 设置/发送 测试整定PID 热的PID测试 频道 开环 闭环 开路输出 更改 商店档案 浏览 炉温度周期 焦炉周期（ sec.min ） 使炉温度周期 四 轴 elmo轴参数 轴的SEL 毫克负载步进轴 毫克打印头X （下应该x轴吧）轴 毫克刮输入/输出轴 毫克刮向上/向下轴 毫克负载步进向上/向下轴 毫克负荷升降打印表轴 毫克旋转轴表 毫克卸下升降打印表轴 毫克卸下步进轴 毫克卸下步进向上/向下轴 毫克，表前线美分grippers轴 毫克表真正的一分钱grippers轴 毫克负荷杂志升降轴 毫克负荷回升的运动轴 毫克焦炉前箍轴 镁炉后方箍轴 镁炉夹具向上/向下轴 镁炉旋转轴 毫克焦炉前线美分grippers轴 镁炉后方美分grippers轴 kp3比例（名次） kp2比例（或） ri2积分（或） 证券及期货顺利因素 sp轴速度 交流轴减速 佛罗里达州轴的立场

Before using this instrument, please in detail read and understood that completely the operating instructions, and will preserve it, prepare the future reference. If you after reading this instruction booklet still had the inextricability question and the question, please inquire to this company. important safe matters needing attention: the instrument must use (AC220V±10%) in the stipulation supply voltage scope, will otherwise interfere with the instrument normal work, possibly will damage the instrument. the instrument must the useful earthing, ensure the personal safety. this instrument for the non-explosion-proof drying oven, refuses the flammable high explosive cargo to put in the box, in order to avoid has the explosion accident. the instrument should avoid in the high temperature moist environment using, will otherwise affect instrument's normal use. after the instrumentation had ended, please by all means must dump. when the instrument breaks down, should have the specialists to overhaul or to consult with this company, with the aim of being solved promptly. important prompt: to guarantee that the instrument can satisfy the technical specification which stipulated that we suggested that you lay aside the instrument in the thermostatic chamber or are loaded with in air conditioning's test chamber to carry on. instrument complete machine schematic drawing the serial number showed: 1, the thermometer well (thermometer user supplies for oneself) 2, baggage shelf 3, gate hasp 4, temperature sensor 5, alarm apparatus 6, the power switch 7, temperature controller 8, thermal ratings to choose 9, telechron timer 10, timer Serial number explanation: 1, the thermometer well (thermometer user supplies for oneself) 2, baggage shelf 3, gate hasp 4, temperature sensor 5, alarm apparatus 6, the power switch 7, temperature controller 8, thermal ratings to choose 9, telechron timer 10, timer one, use to use in each kind of textile bearing the sweat stains color fastness, the color water resistant, to bear the sea water to soak ability the experiment, with YG631 sweat stains color fastness meter necessary use. two, technical specifications: applied code: GB/T3922, 5713, 5714; and so on ISO 105-E01, E02, E03 temperature control scope: Room temperature ~99.9℃ controls the warm precision: ±1℃ testing method: A, 37±2℃; B, 70±2℃ (is suitable for non-arbitration experiment) the experiment time: 0~99m99s,0~99h99m two grade of work room size: 330×330×260mm supply voltage: AC220V±10% powers: 400W external dimensions: 480×430×630mm (L×W×H)the three, operations use to lay aside the instrument on the stable work table. connection power source, opening [power switch]. the instrument must the useful earthing, ensure the personal safety. the choice thermal rating, when carries on 37℃ the experiment, please [thermal rating] the switch do put in “lowly” the position, otherwise, will cause the temperature to be non-uniform. When carries on 70℃ the experiment, to elevate temperature fast, please the first selection switch put in [thermal rating] “high” the position, treats when the temperature rises to 70℃, then [thermal rating] the selection switch puts in “lowly” the position, like this may avoid the temperature overswing, guarantees in the box the temperature uniformity. establishment experiment temperature: The instruction for use establishes the SV parameter and the PID parameter according to [temperature controller]. when hypothesis temperature value (SV parameter), single-clicks the SET key, on the platoon demonstrates SV, the next row of units place character blink, this time [temperature controller] enters the hypothesis condition; Through shifts the key (), the depreciation key (▼), the increment key (▲) either long presses the depreciation key (▼), the increment key (▲) to be possible to change or to change the value continuously; After the hypothesis had ended, then single-clicks the SET key, thrust build-up. in the temperature controller the PID parameter and the self regulating decide the function hypothesis are the high-level functions, when leaving the plant has established, please do not revise at will. in the box the temperature achieves is completely balanced need certain time. Establishment experiment temperature: The instruction for use establishes the SV parameter and the PID parameter according to [temperature controller]. when hypothesis temperature value (SV parameter), single-clicks the SET key, on the platoon demonstrates SV, the next row of units place character blink, this time [temperature controller] enters the hypothesis condition; Through shifts the key (), the depreciation key (▼), the increment key (▲) either long presses the depreciation key (▼), the increment key (▲) to be possible to change or to change the value continuously; After the hypothesis had ended, then single-clicks the SET key, thrust build-up. in the temperature controller the PID parameter and the self regulating decide the function hypothesis are the high-level functions, when leaving the plant has established, please do not revise at will. in the box the temperature achieves is completely balanced need certain time. the establishment experiment time, through presses [timer] on the kneading board to dial the code switch “+” and “-”, may establish the experimental time willfully. Method A: Under 37℃±2℃ the temperature lays aside 4h; Method B: Under 70℃±2℃ the temperature lays aside 1h (to be suitable for non-arbitration experiment). among the attention a time interval switch's condition (the hypothesis time is “the hour” when should be “h”, “the minute” when is “m”. after in the box the temperature achieves balanced, has prepared to have the combination test specimen acid, the alkali two groups of instruments well to place in the drying oven, [telechron timer] puts in “opens” the position, [timer] starts to time, when the experimental time achieves the setting value, the alarm apparatus send out the acousto-optic warning, the expression experiment time already. puts in [telechron timer] “the pass” the position, [timer] stops the time, the alarm apparatus stops the acousto-optic warning. Opens the drying oven gate to take out the test specimen, an experiment ended. after the experiment had ended, please by all means must dump!