成工1979
Highly recommend you according to the number of steps in sequence for installation. Open the packing cases, examine whether the lamps and lanterns and installation accessories is complete; 2. The small ring on the upper bracket, and holding stents lower in hand, make an effort to internal pressure that the lower part of the narrow, card into the bracket seat, frame, loose spending and make the small ring down set under the bracket seat; 3. Install lamps and lanterns of specified type bulb (lamps and lanterns does not contain light bulb); 4. The chimney on the top of the scaffold, and decorate head with closed tight; 5. Install the crystal on the lamp body 6. Insert the plug completely of lamps and lanterns socket; 7. The installation is complete, close to the power supply. The cleaning of lamps and lanterns please disconnect the power supply () 1. The lamp body, please use soft cloth to wipe dust. 2. It is strictly prohibited to use sand paper and steel wire brush, etc To clean lamps and lanterns.
龚家少爷
Installation notes Good wooden cabinet place to be installed in your reserve position, and ensure that there is sufficient space to guarantee that you can wooden cabinet back installation of this machine. Cross screwdriver with loosened wooden cabinet openings on both sides of the electrical fixed, and then open the packaging of this machine, this machine from wooden cabinet back into the wooden cabinet positive openings, the sides until the electrical block tablets withstand wooden cabinet openings the medial, and to ensure that this machine right in the middle of living in wooden cabinet openings. Electrical recycling screwdriver will be fixed on the screws tight. Your package will be moved to the stove selected good position. Stuck power can be used. Before using this machine please read carefully this manual.
张家阿婆
你好，The installment explained Will install the wooden cabinet will lay aside the positionwhich will reserve to you, and will guarantee will have the enoughspace to guarantee you will be able to install from the wooden cabinetback this machine. Operates the wooden cabinet with the cross screwdriver pine to openthe mouth two side electric appliance fixed strip, then hits the booksize machine packing, this machine from the wooden cabinet back 推入to wooden cabinet directly opening the mouth place, keeps off untilthe electric appliance two sides the piece to withstand the insidewhich the wooden cabinet opens the mouth, and guarantees this machineoccupies center which opens the mouth to the wooden cabinet. Again uses the screwdriver the electric appliance fixed strip screwapplied. Will put in order the position which the wrap stove willtransfer to you to designate. Inserts the power source, then starts touse. In uses this machine front please carefully reads the textbookinstruction booklet.
晴猫猫天
Will install a good wood cabinet to place the position that reserves in you, and insure to there is enough space to promise you can install this machine from the wood cabinet back. The electric appliances that loosens with ten word screw knifes to open the wood cabinet openings both sides fixs, then opens the packing of this machine, pushing this machine from the back of the wood cabinet to go into to the wood cabinet to open mouth place face to face, until two sides of the electric appliances block a slice of crest seamy side that lives the wood cabinet openings, and insure this machine to reside in the wood cabinet openings exact center. The screw that use the screw knife to fix electric appliances to again wind up.Move to the whole set of stove you make selection good position.Put on power supply, start use then.Be using origin before the machine invite careful reading manual originally.
优质英语培训问答知识库
