长安三太子
文件名称/ 喷砂产品检验规范/文件编号/W-QA0808/第A版/第00次修订：Document Name / Long product testing norms / /W-QA0808/ document No. a version / revision of article 00 页次 /共1页第1页/发行日期/2005-11-26 ：Pages / page 1 Page 1 total / Issue date /2005-11-26 1．0Purpose：Third of outsourcing products for the recovery of the quality of its machining identification in order to reach more Good quality products to control outsourcing. 2.0Control ：The Company made virtually all of the products 3.0Definition ：no have4.0Responsibilities :4.1Health Management Unit:Responsible for the outsourcing plagued virtually products (including quantities, packaging, etc. 4.2Procurement Office:Responsible for communication with its contractor, the quality of information feedback 4.3Quality control classes:Responsible for the constant scrutiny of the sample recovery products, and recording test results. 5.0Test norms:Test projects / basis / method / tools / determine standards Appearance / shape / samples drawings visual /45W fluorescent light source without distortion and deformation No obvious color difference color No obvious facial scarring India Luster to the standard samples Third homogeneous degrees without thickness and thinness inequality Structural measurements caliper size drawings, drawings for the 1,000-foot sub - Identity / openings testing / drawings requested / conducted by written request to the width of the ruler, to a certain length, the width required to commence after the natural resilience / ruler / started after the commencement of width minus the width, very satisfied. Alcohol testing / cotton Baptist to alcohol, imposed 1kg power to the surface between 50 product / cotton heavy alcohol 1kg / no lost sand Fuzheli (surface) /600#3M adhesive tape, close to the surface to 45 degrees Kok products quickly pull three /3M adhesive tape / no lost sand Packaging (fast) / logo / customer demands visual / meet customer requirements Placed ways / yards or side / plastic bags, cartons / no disorder Props / "workers" font props / meet the "workers" font requirements Develop: Audit:大约就是这样了！不知道你能看明白不？我就照你的范文翻译的！
吃蛋糕的鱼
1. 必须遵照A-13型铝浇铸件；2.铝合金（遵照）美国材料实验协会356-T6 XS04-15（）内侧板内核；3.材料必须遵照铝合金的原材料明细表XR08-4，（），热压制成T6的韧度。4.单位铝合金材料规格：XS04-17(韧度为T5) 5.美国钢铁协会1070-1095型碳钢，（）6.单位钢合金材料规格为VG00-13，完全。7.铝合金（遵照）美国材料实验协会333-t5标准，烫铸。以上括号为不肯定的内容，希望对你有所帮助。
水之云端
文件名称File name/ 喷砂产品检验规范Sand-blasting products inspection code 文件编号File serial number W-QA0808第A版 Ath edition 第00次修订 00th proof 页次 page 共1页 第1页 Total one page/the First page 发行日期Date of Issue /2005-11-26 1.0 目的Objective： 使外发喷砂之产品，在收回时其加工工艺的质量得到鉴定,以达成更 好地管制外发产品质量的目的。Checkup of the processing quality of the exporting sand-blasting products when they are taken back in order to better control their quality.2.0 管制范围：本公司所有外发喷砂的产品 Controlling range: All the exporting sand-blasting products produced in this company3.0 定义Defination：无None4.0 权责：Responsibility 4.1 生管课Production Control Section：负责对喷砂产品的外发点收(包括数量、包装等）； Responsible for checking of the exporting sand-blasting products (including the quantity and package)回收时 通知IQC做来料检验。When they are taken back, Production Control Section should call the IQC to check the materials.4.2 采购课Purchase section：负责与协力厂商的沟通，品质信息的反馈等. Responsible for communication with manufacturers and feedback of quality information.4.3 品管课QC Section：负责对喷砂之产品回收时时的抽样检验,并记录检验结果. Responsible for sampling inspection of the exporting sand-blasting products taken back and recording the inspection results.5.0 检验规范 Inspection code: 检验项目Inspection items /依据 Standards /方法Methods/工具Tools /判定标准 Determining standard 外观 Appearance /形状Shape /样品图纸Sample drawing 目视Eye-viewing /45W日光灯Daylight lamp光源 Lamp-house 无扭曲、变形 No distortion and disformation颜色 无明显色差 Color: no remarkable chromatism.划痕 无明显划痕印 Nick: no remarkable nick marking光泽 符合样品标准 Luster: according with sampling standard.喷砂均匀度 无厚薄不均现象Sand-blasting uniformity: no odds in thickenss.结构Structure 尺寸Size 图纸 Drawing 测量Measurement 卡尺Callipers、千分尺 Micrometer 符合图纸要求 In accordance with the drawing demand 特性Characteristics /开口测试 Hatching measurement /图纸要求 Drawing requirement /按图纸要求展开的宽度，在直尺上取一定的长度，展开到要求的宽度后，自然回弹/直尺/展开后的宽度减去展开前的宽度，极差满足要求。Take a given length on the ruler according to the expansion width of the drawing requirement, and then expand it, naturally spring back/ruler/ the expanded width detract original width, the range should meet the requirement.酒精测试Alcohol measurement: 以棉花浸酒精后，施加1kg力于产品表面来回50次/棉花酒精1kg重物/无掉砂 A cotton wick dipped in alcohol should have been forced 1 kg to the surface of the product for 50 times/ cotton and alcohol, 1kg clog/ No fallen sand granular附着力（表面）Adhesion strength (surface) / 600#3M胶纸，紧贴于产品表面以45度角迅速拉起三次/3M胶纸/无掉砂600#3M gluing clanged tightly on the surface of the product should have been pulled up in an angel of 45°for 3 times / 3 M Gluing/ No sand fallen包装（出货）Package (shipment)/标识 Mark /客户要求Client demand 目视Eye-view /符合客户要求 In accordance with the clients’ demand放置方式 Setting methods /层叠或平放 cascade or horizontal placing /胶袋、纸箱Gluing bags, Paper boxes/无错乱 No disorder 封箱 Box-sealing /“工”字形封箱 “H” -type sealing /符合“工”字形要求 In accordance with the “H” –type requirement制定：Establishment 审核：Auditing
群群群群超爱吃
通知MISMATCH ALLOWABLE IN MIDDLE OF 3.850/3.867 THRU BORE ,BUT MUST DRIFT WITH 3.833″O.D DRIFT X 42″LONG不允许在3.850/3.867通过中间的孔，但必须漂移3.833″外径×42″长漂移
莫小小爱吃肉
NOTES : UNLESS OTHERWISE SPECIFIED . 注意：除非另外说明。1. MATERIAL : ANTISTATIC MATERIAL IS NOT NECESSARY. 1. 材料：并非必须使用防静电材料。OPAQUE ABS FOR OPTICAL MICE. 对于光学鼠标需为不透明的 ABS 材料。DETAIL PLEASE REFER TO DWS-762884-0000 (SPEC-HW, PERMISSIBLE MATERIAL ADDENDUM). 详情请参阅 DWS-762884-0000（说明书-硬件，许可材料附录）HAZARDOUS SUBSTANCE MANAGEMENT :Cd LESS 5ppm , FOLLOW LOGITECH ENCIRONMENTAL. 有害物质控制：镉小于 5ppm，遵循 LOGITECH 环保规定。REQUIREMENTS,HAZARDOUS SUBSTANCE,STD-750779-0000 FOR OTHER SUBSTANCE. 其它物质的要求及有害物质请参阅 STD-750779-00002. DRAFT ANGLES TO BE 1%%176FOR UNTEXTURED SURFACES AND 2.5%%176FOR TEXTURED SURFACES. 2. 对于无纹理表面，拔模角度为 1%%176，对于有纹理的表面为 2.5%%176。3. ALL UNSPECIFIED EXTERIOR (APPEARANCE SURFACE) EDGES TO BE 0.13 MAXIMUM RADIUS, EXCEPT AT PARTING LINE. 3. 所有未指明的外型（外表面）边缘最大半径为 0.13，分型线处除外。4. ALL UNSPECIFIED EXTERIOR (NON-APPEARANCE SURFACE) EDGES TO BE 0.13 MAXIMUM RADIUS, EXCEPT AT PARTING LINE. 4. 所有未指明的外型（非外表面）边缘最大半径为 0.13，分型线处除外。5. STRSIGHT EDGES TO HAVE A STRAIGHTNESS TOLERANCE OF 0.05 PER 25.0, NOT TO EXCEED 0.10 OVER THE ENTIRE LENGTH. 5. 直边的直线度公差：每 25.0 为 0.05，不得超出总长度 0.106. SCULPED SURFACES PEFER TO 3D FILE PROVIDED BY LOGITECH. 6. 雕塑曲面优先采用 LOGITECH 提供的 3D 文件。7. ONE HALF OF A FEATURE DIMENSION ACROSS A CENTER LINE AND/OR A SYMETRICAL CALL-OUT IS EQUAL TO THE DIMENSION SHOWN DIVIDED BY 2 AND ITS TOLERANCE DIVIDED BY 2. 7. 与中心线和/或对称代号相交的特征尺寸的一半等于所示尺寸的1/2，其公差也除以2。8. GATE TRIM TO BE 0.5 MAXIMUM, IF NO FUNCTIONAL IMPACT IN ASSEMBLY. 8. 浇口冗余修正最大为 0.5（如装配中无功能性撞击）。9. NO SINK OR DEPRESSIONS TO BE VISIBLE ON APPEARANCE SURFACES. 9. 外表面无可见沉降或凹陷。10.APPEARANCE SURFACES TO BE FREE OF COSMETIC DEFECTS INCLUDING, BUT NOT LIMITED TO SPLAY, PARTICLES, BURNED PLASTIC/MARKS, AND SIMILAR IMPERFECTIONS. PART MUST MEET THE REQUIREMENTS OF LOGITECH QUALITY SPECIFICATION GOI-740885-00.10. 无需修整的外表面缺陷包括但不局限于斜面、微粒、烧焦塑料/痕迹以及类似的缺陷。但零件必须符合 LOGITECH 质量规范 GOI-740885-00 的要求。
苏州饭饭
注：除非另有说明。 1 。材料：抗静电材料，是没有必要的。 不透明的ABS为光学鼠标。 详情请参阅衍生权证- 762884 - 0000 （规格-硬件，可允许的材料增编） 。 有害物质管理：裁谈会少5ppm ，后续罗技encironmental 。 要求，有害物质，性病- 750779 - 0000为其他物质。 2 。草案角度为1 ％ ％ 176for untextured表面和2.5 ％ ％ 176for质感表面。 3 。所有不详外（外观表面）的优势，以0.13的最高半径，除在临别线。 4 。所有不详外（非外观面）的优势，以0.13的最高半径，除在临别线。 5 。 strsight边缘有直线度公差的0.05 ％ 25.0 ，以不超过0.10以上，整个长度。 6 。 sculped表面pefer三维文件所提供的罗技。 7 。其中一半的一个特征尺寸跨越中心线和/或对称叩应的是，相等于该尺寸显示除以2 ，其公差除以2 。 8 。门饰边0.5最高，如果没有功能的影响，在装配。 9 。没有击沉或洼地被有形外观表面。 10.appearance表面是免费的美容缺陷，其中包括但不限于splay ，粒子，焚烧塑胶/商标，以及类似不完善之处。部分必须符合要求的罗技品质规格戈伊- 740885 - 00 。
优质英语培训问答知识库
