电子说明书英语

【这是逐词翻译的，很准确，希望对你有帮助。】The Sheet Remote cuckoo clock Profile Our advanced technology, using digital technology is introduced is currently the most advanced new generation of remote control cuckoo clock products, certified by the relevant technologies, features and functions are as follows: 1, cuckoo bird clock function 2, accurate travel-time function 3, ultra-low power consumption, built-in batteries, no high-voltage. 4, the product has a user-friendly features. Intelligent time control. The work process is: When the time is the whole point, the host receives Vice-machine (an accurate clock) coming from the whole point of the signal, it will complete a series of movements (birds out, birds with a bird flapping its wings dancing mouth, birds go). The product is not subject to space constraints, the distance may not be a straight line, the host and vice-drive space the distance can reach 60 meters above the host can be hung on the wall, the Deputy machine on your desk, or into the bedroom. The product was sexually-oriented features, light sense of control, so that the owner does not call a break, and there are voices in regulating the function of the size will not affect the owner of a break in the evening. Along with expansion of the function of remote control doorbell function, when someone rang the doorbell at the door when the doorbell will be issued where the host (can be switched doorbell music), to the whole point is that birds sing, not chaos, allowing the owner to determine an accurate yes, or to the guests of the time. Operating parameters: Host: Operating Voltage: DC4.5V Operating Current: Static is less than 1mA at work: 45mA Operating Temperature: -10 ~ +60 ℃ Operating Frequency: 433.92MHZ Vice-machine: Operating Voltage: DC1.5V and DC 9V Current: DC1.5V work: less than 10uA DC9V the static: 0 uA Work: less than 1uA Operating Temperature: -10 ~ +60 ℃ Operating Frequency: 433.92MHZ Instructions: 1, first in the clock (host) and a battery box installed on the No. 1 battery, and a 9V laminated battery. 2, then the birds (Deputy machine) battery pack built-in three No. 1 on the cell. 3, the auxiliary engine on a volume toggle switch to the ON position, his hands in a clockwise direction in accordance with the minute hand on the host toggle, toggle the clock when you do not come across to see the minute hand is not referring to the 12-point location of birds will be out. (The other is the time to adjust before the battery mounted to 12:30, and then install a good host and auxiliary engine battery, so adjust according to a clockwise direction to the actual time.) 4, can time out on the normal, if the transport process of extrusion, there, the minute hand indicated time is not accurate or out of birds can not be on time. Follow these steps to do: install a good battery ---- Vice-machine open until the switch ON, in accordance with the minute hand clockwise SLIDE DIP ----- when the clock can not be met just ring when the time does not necessarily have to immediately stop a few points Caiting ----- according to the vertical direction and then the minute hand, hour hand were pulled out in order. ----- 12 Zhuangshang Qu targeting the clock, the minute hand is also targeting 12-point Zhuangshang Qu. 5, Slide minute hand to adjust to the actual time. Flick the switch on the ADJUST button, press once will increase the number of bird, when the number of bird with the same number of times with the actual stop. 6, when the toggle switch to the ON time is the greatest sound, when the switch toggle to LOW when a small voice, toggle to the OFF time to time sound and movement. Note: 1, do not mix old and new batteries can not be negative batteries are installed against. 2, When the birds do not sound too small or out of the case, please replace the battery. Recommended six months for a battery. 3, hanging product, be sure to maintain a vertical suspension.

KEEP AWAKE保持清醒Sleep-stopping ear alarm keeps drivers from nodding off! 避免入睡型耳机警报器（这个市产品的名称，不太好确定，就根据意思翻译了Sleep-stopping ear alarm）完全阻止了司机在开车时打瞌睡！1.Insert earbud and rotate it up until is fits snugly. The arm of the unit should be about 10°above horizontal as shown. 将耳套放入耳朵并轻轻向上旋转直到稳固不会掉下来。耳套的前臂应该与水平保持10度，如图所式。（呵呵，没有图像）2.whenever your head nods down,the alarm will sound .select either HI Or LOW volume alarm. 每当你的点头时，报警器就会发出警报。可选择发出“高声”（大声）警报或“低声”（小声）警报。3.Sleep-stopping ear alarm keeps drivers from nodding off! 耳机警报器了完全阻止了司机在开车时打瞌睡4.cushioned earbud fits into ear. 将有填充物的耳套放入耳朵里。5.sounds an alert when driver is head nods down. 司机点头时会有警报发出6.HI or LOW volume adjustment. Also useful while Operating heavy machinery or when studying. “高”“低”音量调节器。（本产品）也适用于操作沉闷的机器或学习时使用。7.includes plastic carrying case with keychain and spare battery. 包括带钥匙链的可提捷式塑料盒和备用电池8.Billion team limited 75mody road, tsimshatsui east,kowloon,hongkong. Billion team limited应该是Billion team有限公司mody 大街75号，？？？（后面几个词不是英文偶不懂了），九龙，香港（公司在香港地址）9.runs one DC 1.5V 192 button cell battery (two included) because of continuig inprovements,actual product may differ slightly from photo. 直流1.5伏，192钮扣型电池（两节）操作该产品由于产品仍在不断改善中，实际产品与所示图片样品会有微量不同10.battery replacement remove spare battery from slot located inside plastic carrying case. 更换电池将电池从可提捷式塑料盒内的放电池的凹陷型槽移开to open battery compartment ,lift up lever as indicated above. 为了打开电池间隔间，适当抬起控制杆如图所示（没有图......）remove old battery and replace with new battery .make sure the postive(+）side is facing away from the earbud. 移开旧电池放入新电池。请确定电池正极面向耳塞反面push the lever back into unit until it snaps into place. 将控制杆推回直至嵌入原位11.operating instructions 操作说明to turn unit on, move switch on side of unit to HI or LOW position. 为打开报警器，将开关移动至“高”或“底”位置insert earbud and rotate it up until it fits snugly .the arm of the unit should be about 10 °above horizontal as shown. 将耳套放入耳朵并轻轻向上旋转直到稳固不会掉下来。耳套的前臂应该与水平保持10度，如图所式。to turn unit off,move switch to the OFF position. 为关闭报警器，将开关移动至“关闭”位置when sound goes low,replace battery.当声音过小时，需更换电池呵呵，只是根据意思翻译，不算正式的东东，仅供参考。太久没有写中文了，有点颠三倒四。多多包含~

KEEP AWAKE 让你保持清醒。Sleep-stopping ear alarm keeps drivers from nodding off! 入耳式防睡警报器让驾驶者不再打盹！1.Insert earbud and rotate it up until is fits snugly. The arm of the unit should be about 10°above horizontal as shown. 1）将耳塞插入耳内转动直到舒适地贴近耳内。耳塞杠应与水平面呈10度以上。如图所示。2.whenever your head nods down,the alarm will sound .select either HI Or LOW volume alarm. 任何时候你点头打盹警报器即发出声响，音量大小可以通过选择HI（高）或Low（低）来调节。3.Sleep-stopping ear alarm keeps drivers from nodding off! 入耳式防睡警报器让驾驶者不再打盹！4.cushioned earbud fits into ear. 弹性软垫式耳塞易于入耳。5.sounds an alert when driver is head nods down. 驾驶者点头打盹时警报声响起。6.HI or LOW volune adjustment. 音量高HI（高）低（LOW低）调节Also useful while Operating heavy machinery or when studying. 方便在操作重型机械或学习时使用。7.includes plastic carrying case with keychain and spare battery. 含带有钥匙琏和备用电池的便携式塑料盒8.Billion team limited 75 mody road,tsimshatsui east,kowloon,hongkong. 香港九龙尖沙嘴东谟地75号八佰伴公司（部分为音译）9.runs one DC 1.5V 192 button cell battery (two included) because of continuig inprovements,actual product may differ slightly from photo. 使用DC 1.5V 192号纽扣式电池（附送2个）10.battery replacement remove spare battery from slot located inside plastic carrying case. 电池更换to open battery comparment ,lift up lever as indicated above. 将备用电池从便携式塑料盒的插槽内取出，按上图注明的方式提起杆子打开电池盒。remove old battery and replace with new battery .make sure the postive(+）side is facing away from the earbud. 取出旧电池换上新电池，注意将正极（＋）背向耳塞。push the lever back into unit until it snaps into place. 将杆子推回原位至发出喀嚓声到位为止。11.operating instructions 操作说明to turn unit on, move switch on side of unit to HI or LOW position. 打开耳塞，按侧面的音量高低转换键insert earbud and rotate it up until it fits snugly .the arm of the unit should be about 10 °above horizontal as shown. 将耳塞插入耳内转动直到舒适地贴近耳内。耳塞杠应与水平面呈10度以上。如图所示。to turn unit off,move switch to the OFF position. 将开关调至OFF位置即可关掉报警器。when sound goes low,replace battery.音量变小时请更换电池。

Sheet Remote cuckoo clock Profile Our advanced technology, using digital technology is introduced is currently the most advanced new generation of remote control cuckoo clock products, certified by the relevant technologies, features and functions are as follows: 1, cuckoo bird clock function 2, accurate travel-time function 3, ultra-low power consumption, built-in batteries, no high-voltage. 4, the product has a user-friendly features. Intelligent time control. The work process is: When the time is the whole point, the host receives Vice-machine (an accurate clock) coming from the whole point of the signal, it will complete a series of movements (birds out, birds with a bird flapping its wings dancing mouth, birds go). The product is not subject to space constraints, the distance may not be a straight line, the host and vice-drive space the distance can reach 60 meters above the host can be hung on the wall, the Deputy machine on your desk, or into the bedroom. The product was sexually-oriented features, light sense of control, so that the owner does not call a break, and there are voices in regulating the function of the size will not affect the owner of a break in the evening. Along with expansion of the function of remote control doorbell function, when someone rang the doorbell at the door when the doorbell will be issued where the host (can be switched doorbell music), to the whole point is that birds sing, not chaos, allowing the owner to determine an accurate yes, or to the guests of the time. Operating parameters: Host: Operating Voltage: DC4.5V Operating Current: Static is less than 1mA at work: 45mA Operating Temperature: -10 ~ +60 ℃ Operating Frequency: 433.92MHZ Vice-machine: Operating Voltage: DC1.5V and DC 9V Current: DC1.5V work: less than 10uA DC9V the static: 0 uA Work: less than 1uA Operating Temperature: -10 ~ +60 ℃ Operating Frequency: 433.92MHZ Instructions: 1, first in the clock (host) and a battery box installed on the No. 1 battery, and a 9V laminated battery. 2, then the birds (Deputy machine) battery pack built-in three No. 1 on the cell. 3, the auxiliary engine on a volume toggle switch to the ON position, his hands in a clockwise direction in accordance with the minute hand on the host toggle, toggle the clock when you do not come across to see the minute hand is not referring to the 12-point location of birds will be out. (The other is the time to adjust before the battery mounted to 12:30, and then install a good host and auxiliary engine battery, so adjust according to a clockwise direction to the actual time.) 4, can time out on the normal, if the transport process of extrusion, there, the minute hand indicated time is not accurate or out of birds can not be on time. Follow these steps to do: install a good battery ---- Vice-machine open until the switch ON, in accordance with the minute hand clockwise SLIDE DIP ----- when the clock can not be met just ring when the time does not necessarily have to immediately stop a few points Caiting ----- according to the vertical direction and then the minute hand, hour hand were pulled out in order. ----- 12 Zhuangshang Qu targeting the clock, the minute hand is also targeting 12-point Zhuangshang Qu. 5, Slide minute hand to adjust to the actual time. Flick the switch on the ADJUST button, press once will increase the number of bird, when the number of bird with the same number of times with the actual stop. 6, when the toggle switch to the ON time is the greatest sound, when the switch toggle to LOW when a small voice, toggle to the OFF time to time sound and movement. Note: 1, do not mix old and new batteries can not be negative batteries are installed against. 2, When the birds do not sound too small or out of the case, please replace the battery. Recommended six months for a battery. 3, hanging product, be sure to maintain a vertical suspension.

Zhuangshang Qu？楼上几位弟兄的翻译器也太牛了，竟然直译丫，我稍微修改了下，仅供参考。Wireless cuckoo clock Instructions: 1. Turning the miniute hand of host clock parts to 12:30, then remove the back cover of the host clock and insert the “D” and “6F22” batteries into the compartment2. Remove the back cover of deputy clock and insert three “D” batteries3. Switch the deputy clock to the “ON” position, then turn the minute hand to test alarm function4. Move the minute and hour hands to the right time by hand5. Swich the volume control to meet your need6. Adjust the cuckoo hour by pushing the button if alarmed at the wrong time7. Placed the host and deputy clock in anywhere, the longest range between clock could be 60 metres8. Pls change new battery in time in case of abnormal functionNote: Pls do not move the hour hands while turning the minute hands, it might cause the error timingPls do not place any metal or reflectors between clocks, it might interfere the signal transmittance of clocksPls do not mix the new and old batteries together into clockPls insert the battries properly as the mark on the battary box Pls change the new batteries when the birds do not come out or alarm in low volum, we recommend that the batteries shoud be change twice a year at least for optimum performance and enjoyment

去猪八戒威客网用有偿招标，瞬间搞定,保证专业.顺便说下，我是威友~。

need instruction of electronical edition only.

这段话翻译下来就是以下的了。。。Remote cuckoo clock Profile Our advanced technology, using digital technology is introduced is currently the most advanced new generation of remote control cuckoo clock products, certified by the relevant technologies, features and functions are as follows: 1, cuckoo bird clock function 2, accurate travel-time function 3, ultra-low power consumption, built-in batteries, no high-voltage. 4, the product has a user-friendly features. Intelligent time control. The work process is: When the time is the whole point, the host receives Vice-machine (an accurate clock) coming from the whole point of the signal, it will complete a series of movements (birds out, birds with a bird flapping its wings dancing mouth, birds go). The product is not subject to space constraints, the distance may not be a straight line, the host and vice-drive space the distance can reach 60 meters above the host can be hung on the wall, the Deputy machine on your desk, or into the bedroom. The product was sexually-oriented features, light sense of control, so that the owner does not call a break, and there are voices in regulating the function of the size will not affect the owner of a break in the evening. Along with expansion of the function of remote control doorbell function, when someone rang the doorbell at the door when the doorbell will be issued where the host (can be switched doorbell music), to the whole point is that birds sing, not chaos, allowing the owner to determine an accurate yes, or to the guests of the time. Operating parameters: Host: Operating Voltage: DC4.5V Operating Current: Static is less than 1mA at work: 45mA Operating Temperature: -10 ~ +60 ℃ Operating Frequency: 433.92MHZ Vice-machine: Operating Voltage: DC1.5V and DC 9V Current: DC1.5V work: less than 10uA DC9V the static: 0 uA Working time: less than 1uA Operating Temperature: -10 ~ +60 ℃ Operating Frequency: 433.92MHZ Instructions: 1, first in the clock (host) and a battery box installed on the No. 1 battery, and a 9V laminated battery. 2, then the birds (Deputy machine) battery pack built-in three No. 1 on the cell. 3, the auxiliary engine on a volume toggle switch to the ON position, his hands in a clockwise direction in accordance with the minute hand on the host toggle, toggle the clock when you do not come across to see the minute hand is not referring to the 12-point location of birds will be out. (The other is the time to adjust before the battery mounted to 12:30, and then install a good host and auxiliary engine battery, so adjust according to a clockwise direction to the actual time.) 4, can time out on the normal, if the transport process of extrusion, there, the minute hand indicated time is not accurate or out of birds can not be on time. Follow these steps to do: install a good battery ---- Vice-machine open until the switch ON, in accordance with the minute hand clockwise SLIDE DIP ----- when the clock can not be met just ring when the time does not necessarily have to immediately stop a few points Caiting ----- according to the vertical direction and then the minute hand, hour hand were pulled out in order. ----- 12 Zhuangshang Qu targeting the clock, the minute hand is also targeting 12-point Zhuangshang Qu. 5, Slide minute hand to adjust to the actual time. Flick the switch on the ADJUST button, press once will increase the number of bird, when the number of bird with the same number of times with the actual stop. 6, when the toggle switch to the ON time is the greatest sound, when the switch toggle to LOW when a small voice, toggle to the OFF time to time sound and movement. Note: 1, do not mix old and new batteries can not be negative batteries are installed against. 2, When the birds do not sound too small or out of the case, please replace the battery. Recommended six months for a battery. 3, hanging product, be sure to maintain a vertical suspension.

KEEP AWAKE Sleep-stopping ear alarm keeps drivers from nodding off! 保持清醒防睡耳机报警器让司机远离瞌睡1.Insert earbud and rotate it up until is fits snugly. The arm of the unit should be about 10°above horizontal as shown. 1. 戴上并旋转耳塞至耳朵感觉最舒适时止。 如图所示，本设备之前臂应置于水平线以上10°左右。2.whenever your head nods down,the alarm will sound .select either HI Or LOW volume alarm. 2. 一旦你头部下倾，本报警器即发出警示音。有高音或低音警示可供选择。3.Sleep-stopping ear alarm keeps drivers from nodding off! 3. 防睡耳机报警器让司机远离瞌睡4.cushioned earbud fits into ear. 4. 耳塞带有软垫，可舒适地塞进耳朵。5.sounds an alert when driver is head nods down. 5. 当司机头部下倾时，即发出警示音。6.HI or LOW volune adjustment. Also useful while Operating heavy machinery or when studying. 6. 高音或低音调节。亦适用于操作重型机械或驾驶练习。7.includes plastic carrying case with keychain and spare battery. 7. 配塑胶包装盒，钥匙链和备用电池。8.Billion team limited 75mody road,tsimshatsui east,kowloon,hongkong. 8. 十亿有限公司香港九龙尖沙咀东麽地道75号9.runs one DC 1.5V 192 button cell battery (two included) because of continuig inprovements,actual product may differ slightly from photo. 9. 工作环境：直流1.5伏，192钮扣型电池（两节）由于产品不断更新，实际产品可能与图片略有不同。10.battery replacement remove spare battery from slot located inside plastic carrying case. to open battery comparment ,lift up lever as indicated above. remove old battery and replace with new battery .make sure the postive(+）side is facing away from the earbud. push the lever back into unit until it snaps into place. 10. 电池更换将用尽的电池从塑胶包装盒内的狭槽取出。要打开电池盖，如上所示，将操作杆拉起。取出旧电池，装入新电池。确保电池正极背向耳塞。按下操作杆直至其完全合入本设备。11.operating instructions to turn unit on, move switch on side of unit to HI or LOW position. insert earbud and rotate it up until it fits snugly .the arm of the unit should be about 10 °above horizontal as shown. to turn unit off,move switch to the OFF position. when sound goes low,replace battery.11. 操作说明 要启动本设备，将其侧面的开关旋至“高音”或“低音”位置。 戴上并旋转耳塞至耳朵感觉最舒适时止。如图所示，本设备之前臂应置于水平线以上10°左右。 要关闭本设备，将开关旋至“关闭”位置。 若警示音变弱，请更换电池。