安装螺栓英文

螺钉与螺栓有明确的专业名词术语，有明确的区分，不应随意称谓。 螺钉与螺栓的归类有100多项国家标准，仅螺钉的标准就有92项，标准太多，不方便记忆，不一一列出，但有规律可循，可以这样简单区分： 凡是圆头和螺纹杆构成的紧固件称为螺钉。其须使用起子和六角工具来拧紧，如开槽圆柱头螺钉、开槽沉头螺钉、十字槽沉头螺钉、内六角圆柱头螺钉、内六角沉头螺钉等等；没有圆头的各种紧定螺钉；各种定位螺钉、不脱出螺钉、轴位螺钉；各种滚花螺钉（带滚花就不用工具拧紧）；还有木螺钉和自攻螺钉等等。 带六角头、方头和螺纹杆的紧固件称为螺栓。没有六角头但两头带螺纹中间为光杆的称为双头螺栓（双头螺柱）、浑身都是螺纹的称螺杆，此外还有沉头方颈螺栓、T形槽用螺栓、地脚螺栓、U形螺栓。螺栓的拧紧器具为扭矩扳手、开口尺寸不变的各种形状的固定扳手、开口尺寸可变的活动扳手，液压紧配螺栓则需要液压泵等附件。 简而言之：用起子和六角工具拧紧的紧固件是螺钉，用扳手拧紧的紧固件是螺栓。 注意：不能按公称直径大小和长短来区分。例如一根M48长300mm的圆柱头紧固件，GB/70.1-2008标准将其定义为内六角圆柱头螺钉，不是螺栓。

螺栓螺母麻烦采纳，谢谢!

中文品名descriptioninchinese英文品名desciptioninenglish圆锥销taperpins圆柱销parallelpins开槽圆柱头螺钉slottedcheeseheadscrews开槽盘头螺钉slottedpanheadscrews单耳止动垫圈tabwashers开口销splitcooterpins开槽半沉头木螺钉slottedraisedcskheadwoodscrews开槽半圆头木螺钉slottedroundheadwoodscrews开槽沉头木螺钉slottedcountersunkheadwoodscrews平垫plainwashers平垫（带倒角）mediunwashers

中文品名Description in Chinese 英文品名Desciption in English圆锥销 Taper pins圆柱销 Parallel pins开槽圆柱头螺钉 Slotted cheese head screws开槽盘头螺钉 Slotted pan head screws单耳止动垫圈 Tab washers开口销 Split cooter pins开槽半沉头木螺钉 Slotted raised csk head wood screws开槽半圆头木螺钉 Slotted round head wood screws开槽沉头木螺钉 Slotted countersunk head wood screws平垫 Plain washers平垫（带倒角） Mediun washers平垫 Plain washers重型弹垫 Spring lock washers,tang ends标准弹垫 Spring lock washers,square ends鞍形弹垫 Single coil spring lock washers弹簧止动垫圈 Curved spring washers波形弹垫 Wave spring washersT型方颈螺栓 T-head blots with square neckT型双接头螺栓 T-head bolts with double nip螺纹圆锥销 Taper pins with threaded endT型头螺栓 T-head bolts蝶型螺母（美制） Wing nuts America form蝶型螺母（德制） Wing nuts germany form蝶型螺母（美制） Wing screws America form蝶型螺母（德制） Wing screws germany form圆球型盖型螺母 Ball knobs开槽带孔球面圆柱头蚴钉 Slotted capstan screws开槽长圆柱端紧定螺钉 Slotted set srews with full dog point开槽平端紧定螺钉（半牙） Slotted set srews with chamfered end小六角特薄细牙螺母 Pip nuts with thread外舌止动垫圈 External tap小垫圈(用于圆柱头螺钉) Washers for cheese head screws方斜垫圈（U型） Square taper washers for U-section方斜垫圈（I型） Square taper washers forI-sections方垫圈 Square washers开槽凹端紧定螺钉 Slotted set with cup point六角薄螺母 Hexagon thin nuts细牙六角薄螺母 Hexagon thin nuts木螺钉专用垫圈 Rounds washers for wood constructions密封帽 Sealing caps,push-in type活节螺栓B型 Eye bolts form B内舌止动垫圈 Internal tab washers双耳止动垫圈 Washers with two taps滚花高头螺钉 Knurled thumb screws with collar开槽滚花高头螺钉 Slotted knurled thumb screws with collar滚花高螺母 Knurled thumb nuts with collar滚花薄螺母 Knurled thumb thin nuts锁紧垫圈 Sealing washers轴用弹性垫圈 Retaining rings for shafts(external),circlips孔用弹性垫圈 Retaining rings for bores(internal),circlips方头带垫螺栓 Square head bolts with collar方头圆柱底端螺栓 Square head bolts with half dog point方头带垫关圆底端螺栓 Square head bolts with collar,half dog pointT型槽螺母 T-slot nuts单头螺柱 Single end studs地脚螺栓 Masonry bolts带槽圆螺母 Slotted round nuts端面带孔圆螺母 Round nuts with drilled holes in one face开槽平端紧定螺钉 Slotted set screws with flat point开槽锥端紧定螺钉 Slotted set screws with cone point六角螺母 Hexagon nuts方螺母-C Square nuts六角头螺钉 Hexagon screws六角头圆柱端紧定螺钉 Hexagon set screws with full dog point薄型方螺母-B Square nuts without bevel(pressed nuts)六角头木螺钉 Hexgon head wood screw (coach screws)吊环螺钉 Lifting eye bolts吊环螺母 Lifting eye nuts圆锥型槽销 Grooved pins,taper grooved圆锥型槽销（半槽） Grooved pins,taper grooved half length平行槽销（带倒角） Grooved pins,parallel grooved full length前端凹槽槽销 Grooved pins,reverve grooved half length中部凹槽槽销 Grooved pins,center grooved圆头槽销 Grooved pins with round head沉头槽销 Grooved pins with countersunk head六角螺母棒 Turnuckles(center parts),made out of hexagon bar花蓝螺栓 Turnuckles with eye bolt and hook bolt弹性圆柱销 Spring pins,heavy type组合式盖型螺母 Hexagon domed cap nuts开槽圆螺母(配合沟头扳手) Slotted round nuts for hook spammer圆螺母（带插销孔） Round nuts with set holes盘型弹簧垫圈 Disc springs喉箍 Hose clamps润滑油嘴（旋扭头） Lubricating nipples,button head管夹 Shackles for conduiltsU型螺栓 Stirrup bolts(U-bolts)球面垫圈 Spherical washers,conical seats圆柱销 Parallel pins厚六角螺母 Hexagon nuts,1.5d厚六角法兰面螺母 Hexagon nuts,1.5d with collar长六角螺母 Hexagon nuts,3d外齿锁紧垫圈 External teeth lock washers内齿锁紧垫圈 Internal teeth lock washers外锯齿锁紧垫圈 External teeth serrated lock washers内锯齿锁紧垫圈 Internal teeth serrated lock washers开口挡圈 Retaining rings for shafts(E-rings),circlips平键（A型） Parallel keys(form A)半圆键 Woodruff keys嵌环（支撑环） Thimbles机器螺钉和垫圈组合件 Screws and washers assemblies自攻螺钉和垫圈组合件 Tapping screws and washer assemblies薄型带孔内六角圆柱螺钉 Hexagon cocket head cap screws with hole,low head大六角头螺栓 Hexagon head bolts with large head(friction grip nolts)大六角螺母 Hexagon nuts with large wideth across flat(friction grip nuts)大垫圈 Round washers for friction grip bolts楔型方垫圈 Spuare taper washers for friction grip bolts on T-六角法兰面螺母 Hexagon flange nuts全金属六角锁紧螺母（2型） Prevailing torque type hexagon nuts,all metallic nuts轻型弹性圆柱销 Spring pins,light type重型弹性圆柱销用垫圈 Washers for bolts with heavy type spring pinssISO公制螺纹螺钉（多种头型） Thread forming screws for ISO-metric thread自攻自钻螺钉（多种头型） Self-drilling tapping screws开槽切削螺纹螺钉（多种头型） Thread cutting screws十字槽切削螺纹螺钉（多种头型） Thread cutting screws cross recessT型四爪螺母 Tee nuts with pronge钢结构用六角头螺栓连接副 Hexagon head fitted bolts for steel structures开槽盘头自攻螺钉 Pan head tapping screws with slot开槽沉头自攻螺钉 countersunk flat head tapping screws with slot开槽半沉头自攻螺钉 Raised sountersunk oval head tapping screws with slot六角头自攻螺钉 Hexagon tapping screws圆柱头螺钉用弹簧垫圈 Spring lock washers for screws with cylindrical heads十字槽盘头自攻螺攻 Pan head tapping screws with cross recessed十字槽沉头自攻螺攻 Countersunk flat head tapping screws with cross recessed十字槽半沉头自攻螺攻 Raised countersunk oval head tapping screws with cross薄型内六角圆柱头螺钉 Hexagon socket head cap screws with,reduced head十字槽盘头螺钉 Pan head screws with cross recessed钢结构用垫圈 Washers for steel structures钢结构用六角头螺栓 Hexagon head bolts for steel structures内六角沉头螺钉 Hexagon socket coutersunk head screws轴用钢丝挡圈 Roundwire snap rings for shafts十字槽半沉头木螺钉 Cross recessed raised countersunk head wood screws十字槽圆头木螺钉 Cross recessed round head wood screws十字槽沉头木螺钉 Cross recessed countersunk head wood screws螺纹护套(普通、自锁等) Ciol inserts,coarse,fine thread,silf locking大外径垫圈 Washers,outside diameter appro.3d 弹簧卡子 sping cotter for a bolt平板螺栓 Belting bolts(elevator bolts)干壁钉（墙板钉） Dry wall screws环型螺母 Lifting nuts(eye nuts)圆螺母用止退垫圈 Tab washer for slotted round nuts